User Manual

19
2. Follow the operating instructions of your Bluetooth mobile phone to start the
pairing process. Typically, this has to be done by going to a setup or connect
menu and then selecting the options to discover Bluetooth devices.It may take
several seconds to establish a Bluetooth connection. Your phone's display
should indicate that it has found the model name “CS8132”;and prompt you for
a passkey or PIN. Enter a sequence of “0000”.
3. If the pairing is successful, the LED will flash blue every 2 seconds. If pairing
does not occur as expected, turn the Headset and the mobile phone off. Wait
for 10 seconds and repeat the pairing process from the beginning.
4. After pairing, mobile phone will auto connect to the Headset if it has auto
connection feature. If mobile phone doesn't have auto connection feature,
please follow the mobile phone menu to connect the Headset. After successful
connection , the LED will flash blue every 3 seconds.
8.2 Answering incoming calls / Rejecting incoming calls
When an incoming call is present, a ring tone will be heard from the earpiece
of the Headset. Press button will answer the call. Press
button will reject the call.
and hold
for about 2 seconds
Reminder: Please adjust the volume of car audio system to suit your needs as
different sources may have different pre-set volume levels.
CS8132 / CS8132T