User's Manual

ManualsBrandsIn Tech Electronics ManualsElectronicsBluetooth Car Kit

I-2 Function

I-2-1 On/Off

I-2-2 Volume Up

I-2-3 Volume Down

I-2-4 LED

I-2-5 DC Socket

I-2-6 Microphone

I-2-7 Speaker

I-2-8 Battery Door

(please refer to Fig.1)

If you press “On/Off ”, you can:

Switch on and Off

Pair

Answer a new call

Reject a call

Make a new call using voice dialing

Increase the speaker volume

To mute/un-mute the microphone

Redial the last dialed number

Decrease the speaker volume

Answer call waiting

There are two LED colors (blue and red) to indicate the state of this

Car-Kit

It serves as a recharging power socket for rechargeable batteries or

supplies the power to the Car Kit when the car charger is connected

to your car.

Loading and unloading rechargeable batteries by opening the

battery Door.

◎

Built-in

It allows you and your friend at far end to communicate with quality

voice.

I-2-9 Visor Clip

Clip the hands-free ar it under your car's sun visorCK .

II. How to Use

II-1 Charge the Batteries

II-2 Turn on the Hands-free Car Kit

(.)please refer to Fig 2

Before you use for the first time, please charge the batteries for 6 hours.

After the first time, you can fully charge your low batteries in 4 hours.

If the Hands-free Car Kit is powered off, press and hold “On/Off ” for 2

seconds. A long tone will indicate that the hands-free Car Kit has turned

on. At the same time, blue LED will flash for a second. And then, blue

LED will keep on flashing every 3 seconds.

Thank you for buying the BT 77P, Hands-free Car Kit.Bluetooth

Warning Use only rechargeable batteries:.

Fig.2

Fig.3

I. Profile and Its Function…………………………………………………………………………1

I-1 Profile………………………………………………………………………………………1

I-2 Function……………………………………………………………………………………2

II. How to Use ………………………………………………………………………………………3

II-1 Charge the Batteries……………………………………………………………………3

II-2 Turn on the Hands-free Car Kit………………………………………………………3

II-3 Pair the Hands-free Car Kit with Your Mobile Phone…………………4

II-4 Establish Link………………………………………………………..………5

II-5 Clip the Hands-free Car Kit under Your Sun Visor …………………………………5

II-6 Answer an Incoming Call………………………………………………………………6

II- Transfer Calls between This Hands-free Car Kit and Your Phone…..6

II-8 Make a New Call by Using Voice Dialing……………………………………………6

II- 9 …...…………………………………………………….…7

II-10 Mute the Microphone……...………………………………………………………….…7

II-11 End a Call……………………………………………………………………….…………7

II-12 Reject a Call … …………………………………………………………………..………7

II-13 Redial Last Dialed Number……………………………………………………………7

II-14 Adjust the Speaker Volume…………………………………………………….………8

II-15 Recharge the Low Batteries…………………………………………………..………8

II-16 Turn off the Hands-free Car Kit…………………………………………………………8

II-17 VoIP with USB Dongle…………………………………………………………………9

II-18 Auto connection to the Mobile Phone…………………………………10

II-19 Auto power off…………………………………………………………………………10

III. Maintenance and SafeUse …..........………………………………………………………10

IV. Electrical Power Specification of Car Charger / AC Power Adaptor for BT 77P....…..10

V. Package Contents ...........…..………………………………………………………………11

FCC Interference statement ………………………………………………………………………12

Bluetooth

Answer the call waiting

Table of Content

II-3 Pair the Hands-free Car Kit with Your Mobile Phone

II-3-1 Put the hands-free Car Kit in pairing mode

II-3-2 Put your Mobile Phone in pairing mode

II-3-3 Pair the hands-free Car Kit with your Mobile Phone

Bluetooth

When the hands-free Car Kit is powered off, press and hold

“On/Off ” for 5 seconds. In the first 2 seconds, a long tone will

indicate that the hands-free Car Kit has turned on. At the same

time, blue LED will flash for a second. At the end of 5 seconds, a

double tone will be heard. Then the red and blue LEDs will flash

alternatively, which indicates the hands-free Car Kit has entered

into the pairing mode.

II-3-2-1 Follow the operation manual of your mobile

phone to start the pairing process. Typically, this has to be done

by going to a setup or connect menu and then selecting the options

to discover devices. may take several

seconds to establish a connection.

II-3-2-2 Your phone's display will indicate that it has found the new

device “BT 77P”. When you want to pair it, the phone's display

would demand a passkey or PIN, then you can enter a sequence of

“0000”.

The blue LED of hands-free Car Kit will flash every 3 seconds

indicating successful pairing. The phone may also ask whether

you want to change the Car Kit's name. We recommend you

should approve the name of “BT 77P” and do not change it.

Note: Make Sure the batteries are fully charged

Note: Makesure if pairing does not occur as expected, turn off the

hands-free Car Kit and your phone, then wait for 10 seconds.

Turn on them again and repeat from Step 3-1 to Step3-3

Bluetooth

Bluetooth Bluetooth

II-4 Establish Link

II-5 Clip the Hands-free Car Kit onto Your Sun Visor

Bluetooth

After pairing, the mobile phone should have “connect” menu. Please select

it to establish the link. A beep tone will indicate that the Car Kit is

connected. Now you are ready to make and answer calls on the hands-free

Car Kit.

(Please refer to Fig. 3)

Note: For other phones, please follow their operation manuals to establish

the link!

II-6 Answer an Incoming Call

II- Transfer Calls between This Hands-free Car Kit and Your

Phone

V-7-1

V-7-2

II-8 Make a New Call by Using Voice Dialing

II-8-1 When using a Mobile Phone:

II-8-2 When using a mobile phone without built-in and

requiring a dongle:

When an incoming call is present, the hands-free Car Kit will ring. Press

“On/Off ” and you can answer the call. The blue LED will continue to flash

once a second while the call is in session.

When you are in session, calls can be transferred from your

phone to the hands-free Car Kit and vice versa.

From phone to the Car Kit

Press “On/Off ” once, the call will be transferred to the Car Kit.

From Car Kit to the Phone

Please follow the operation manual of your phone.

II-8-1-1 Press “On/Off ” on the hands-free Car Kit shortly when the

Car Kit is standby.

II-8-1-2 Put through the call

After the beep tone on the hands-free Car Kit, you can make a voice

dial by saying the name of the person on the hands-free Car Kit. The

call will be connected in a few seconds.

II-8-2-1Press “On/Off ” on the hands-free Car Kit shortly when the

Car Kit is standby.

7 Bluetooth

Bluetooth

Note: Make sure that the voice dialing function is properly set up in

the mobile phone and it is within the range of the hands-free Car Kit.

Note:Make sure that the voice dialing function is properly set up in

the Mobile phone and it is within the range of the hands-free Car Kit.

II-8-2-2 Put through the call

After the beep tone on the hands-free Car Kit, you can make a voice

dial and the call will be connected in a few seconds.

uring the active call in session if another call is coming, press “Volume

Down” for 2 seconds will make the mobile phone switch to the waiting call

and place the active call on hold. Press “Volume Down” for 2 seconds

again, mobile phone will come back to the first active call.

Press“Volume Up” for 2 seconds and a beep tone will indicate the

microphone is muted. A periodic reminder tone will be heard while

the mute function is active.

When the microphone is muted, press “Volume Up” for 2 seconds.

Then the mute is released and the periodic reminder tone will

stop.

While a call is in session on the hands-free Car Kit, press “On/Off ” and

you will disconnect the call. A long tone will indicate that the call has

ended. After the call is disconnected, the blue LED will flash normally.

When the hands-free Car Kit is ringing, press “On/Off ” for 2 seconds.

Ringing will stop and a long tone will indicate that the call is rejected.

To redial the last dialed number, press “Volume Down ” for 2 seconds

when the Car Kit is standby. A beep tone will indicate an attempt to

redial.

II-9 Answer the call waiting

II-10 Mute the Microphone

II-10-1 To mute a call

II-10-2 To un-mute a call

II-11 End a Call

II-12 Reject a Call

II-13 Redial Last Dialed Number

I Profile and Its Function.

I-1 Profile (Fig.1)

1. Volume Down

2. Volume Up

3. On/Off

4. DC Socket

5. Microphone

Fig. 1

6. LED

7. Speaker

8. Battery Door

9. Visor Clip

Environmental

friendly

Car charger

Bluetooth

Hands-free Car Kit

CS8112 (BT 77P)

User Manual

CS8112 / Abe

Summary of content (2 pages)

PAGE 1
CS8112 / Abe I-2 TM ® Bluetooth Hands-free Car Kit CS8112 (BT 77P) User Manual Environmental friendly Function (please refer to Fig.
PAGE 2
II-14 Adjust the Speaker Volume While a call is in session, pressing and releasing “Volume Up” will increase the speaker volume, and pressing and releasing “Volume Down ” will decrease the speaker volume. A double tone will be heard whenever the volume limit is reached. II-15 Recharge the Low Batteries (please refer to Fig.2) The LED of this Car Kit will flash red instead of blue when the battery are low. There will also be a tone every 2 minutes. Please connect the charger cable to the Car Kit.