Manual

Information is subject to change without notice. In-Situ and the In-Situ logo, Win-Situ, TROLL, BaroTROLL, RuggedReader, RuggedCable, and RDO are
trademarks or registered trademarks of In-Situ Inc. Viton is a registered trademark of DuPont Dow Elastomers. Delrin is a registered trademark of E. I.
DuPont de Nemours and Company. Microsoft, Windows, and Windows Vista are trademarks or registered trademarks of Microsoft Corporation Copyright
© 2007, 2009 by In-Situ Inc. All rights reserved.
Level TROLL
®
/ Aqua TROLL
®
/ MP TROLL
®
9500
1 800 446 7488
(toll-free, US and Canada) or 970 498 1500 www.in-situ.com
0052502 rev 002 01/09
CAUTION: DO NOT EXCEED 16V EXTERNAL
POWER FOR AN MP TROLL 9500. Use a con-
verter that supplies 16V or less.
RuggedCable
Level TROLL
MP TROLL 9500
Aqua TROLL
inSTaLLaTiOn—USB SOfTwaRe
1. Install the latest Win-Situ
®
software from the In-Situ CD or web-
site to a desktop/laptop computer running Microsoft Windows
2000 or higher.
• Win-Situ5,version5.6orhigherforaLevelTROLLor
Aqua TROLL
• Win-Situ4,version4.57.4orhigherforaMulti-Parameter
TROLL 9500
When asked, select the option "Install USB TROLL Com Driv-
ers." Two drivers will be loaded to your hard drive, one for the
USB TROLL Com, one for the USB TROLL Com serial port.
TIP: Be sure to install USB TROLL Com drivers when
installing Win-Situ.
2. After installation, plug the USB TROLL Com into a USB port on
your computer.
• Windows2000,WindowsVista:Whennewhardwareis
detected, the drivers are installed automatically.
• WindowsXP:FollowtheinstructionsintheFoundNew
Hardware Wizard. Select the option "Install software auto-
matically."
3. After installation, check as follows to find which COM port the
USB drivers are using:
• Windows2000,WindowsXP:ControlPanel>System>
Hardwaretab>DeviceManager>Ports.Clicktheplus
sign to display the ports.
• WindowsVista:ControlPanel>System>DeviceManager
(Administratorpermissionrequired)>Ports.Clicktheplus
sign to display the ports.
Remember the port number. You will need it when
connecting to the instrument in Win-Situ.
GUiDeLineS anD pReCaUTiOnS
• The computer connector is not waterproof.
• Softdustcapsprotecttheconnectorsduringshipping.Keepthe
caps to protect the connector pins and o-ring when they are not
mated.
• OperatingsystemrequirementsforWin-SituandUSBTROLLCom
drivers:Windows2000ProfessionalSP4orhigher,WindowsXP
Professional SP2 or higher, or Windows Vista SP1 or higher.
USB TROLL COm
Cable Connect
0052500