User Manual

800-446-7488 29 www.in-situ.com
General Information - Alarms
The Alarms tab configures Tube system and probe alarms. For additional information
on alarms, see "Alarms - Overview" on page 40.
1 Enables/disables the Tube system reset alarm.
2 Enables/disables the Tube temperature alarm.
3 Enables/disables the Tube tilt alarm.
4 Enables/disables the Tube failed to send data alarm.
5 Enables/disables the Tube battery alarm.
6
Enables/disables probe reading alarms. This must be enabled to receive alarms
from probes.