Technical Specifications

Model Applications
DB480
SKU:
6399342
Installs in 2X6 (or 2X4 walls with
furring strip) for venting up or
down with a larger receiving
area to accommodate pedestal
and stand-alone dryers.
General Information
Benets:
• Locate the dryer right up against the wall
• Flex is protected from getting crushed
• Lint build-up is minimized
• Standard installation on the bottom plate every time
• Cleaner, more professional looking nish
• Efciency is increased…clothes dry faster
• Dryer related service calls are almost eliminated
• Laundry room appears larger to prospects
• Reduces the re hazard
• Reduces mold potential in the wall
Features:
• Accommodates pedestal and stand-alone dryers
• No trim-ring piece is needed
• Elbow eliminator…gain 5 foot of duct run
• Surface is paintable, no masking needed
Manufactured By
Performance Data
For Use:
• Dryer vent hose receptacle
• Doubles as gas connection receptacle
• Meets code requirements as a clean-out
Material:
• Deep drawn 22 gauge Aluminized Steel (.028")
US Patents 5,476,183, 6,419,102 and 7,731,045
Technical Product Specications
Made in the USA Dryerbox
®
– U.S. Patents 5,476,183, 6,419,102 and 7,731,045
MODEL 480
17 " overall
23
½
"
overall
4 ¼"
Top Panel View
20 ½" inside
5 "
1
8
4 " wide
5
16
3 " deep
7
8
5 "
1
4
flex port
gas port
14" inside
" flange
3
8
3
8
Primary Installation Scenarios — Installs 4 Ways
Upward Venting Downward Venting
Stand-alone
Stand-alone
Pedestal
Pedestal
In-O-Vate Technologies, Inc.
810 Saturn Street, Suite 20
Jupiter FL 33477
Telephone: [phone]
Facsimile: 561-745-9723
www.Dryerbox.com