HM10 Bluetooth Module Datasheet

HM Bluetooth module datasheet
-------------------------------------------------------Last Version V507 2013-08-23
２１
19. Restore all setup value to factory setup
Send Receive Parameter
AT+RENEW OK+RENEW None
20. Restart module
Send Receive Parameter
AT+RESET OK+RESET None
21. Query/Set Master and Slaver Role
Send Receive Parameter
AT+ROLE? OK+Get:[para1]
AT+ROLE[para1] OK+Set:[para1]
Para1: 0, 1
0: Peripheral
1: Central
Default: 0
22. Query RSSI Value
Send Receive Parameter
AT+RSSI? OK+RSSI:[para1] None
Require: AT+MODE value > 0
This command only used by Remote device query when connected.
23. Query Last Connected Device Address
Send Receive Parameter
AT+RADD? OK+RADD:MAC Address None
24. Query/Set Stop bit
Send Receive Parameter
AT+STOP? OK+Get:[para1] None
AT+STOP[para1] OK+Set:[para1] Para1:0, 1
0: One stop bit
1: Two stop bit
Default: 0 (One stop bit)
25. Work immediately
Send Receive Parameter