HM10 Bluetooth Module Datasheet

HM Bluetooth module datasheet
-------------------------------------------------------Last Version V507 2013-08-23
１７
“OK+CONNF” will received after about 10 minutes.
7. Query/Set filter AT command parameter in AT+MODE value is 2
Send Receive Parameter
AT+FILT? OK+ Get:[para1]
AT+FILT[para1] OK+ Set:[para1]
Para1: 0, 1
1: Don’t filter AT command
0: Filter AT command
Default: 0
If this command value is setup to “1”, Remote device AT command string
will not sent to local UART.
8. System Help Information
Send Receive Parameter
AT+HELP? Help Information None
9. Query/Set Module work type
Send Receive Parameter
AT+IMME? OK+ Get:[para1]
AT+IMME[para1] OK+ Set:[para1]
Para1: 0, 1
1: When module is powered
on, only respond the AT
Command, don’t do anything.
until AT + WORK is received
0: When power on, work
immediately
Default: 0
This command is only used for Central role.
10. Query/Set Module Work Mode
Send Receive Parameter
AT+MODE? OK+Get:[para1]
AT+MODE[para1] OK+Set:[para1]
Para1: 0, 1, 2
0: Transmission Mode
1: Remote Control Mode