HM10 Bluetooth Module Datasheet

HM Bluetooth module datasheet
-------------------------------------------------------Last Version V507 2013-08-23
１５
from http://www.jnhuamao.cn/Bluetooth_en.rar
1. Test Command
Send Receive Parameter
AT OK
OK+LOST
None
If Module is not connected to remote device will receive: “OK”
If Module has connected, module will disconnected from remote device, if “AT
+ NOTI” is setup to 1, will receive: “OK+LOST”
2. Query module address
Send Receive Parameter
AT+ADDR? OK+ADDR:MAC Address None
3. Query/Set baud rate
Send Receive Parameter
AT+BAUD? OK+Get:[para1]
AT+BAUD[para1] OK+Set:[para1]
Para1: Baud rate No.
0---------9600
1---------19200
2---------38400
3---------57600
4---------115200
5---------4800
6---------2400
7---------1200
8---------230400
Default: 0(9600)
e.g.
Query baud:
Send: AT+BAUD?
Receive: OK+Get:0