How-To Guide

44
1.
Use modes
In&motion has developed two detection modes:
Street mode:
use on roads;
Track mode:
use on regulated closed circuits.
The selection of the detection mode is carried out
under the sole responsibility of the user who must
make sure before each use that he/she has selected
the right detection mode according to his/her use.
The detection modes are designed to address risks
specific to the intended use environment. As a result,
the modes offer protection against different events
(e.g. frontal collision in street riding mode) and
care should be taken to make sure that a mode that
properly applies to actual use is selected. A failure to
do so, may compromise the protections provided by
the device.
The user will be able to select, change and check the
detection mode through the «My In&bo mobile app.
If you do not have a compatible mobile phone, a manual
procedure is available on my.inemotion.com website.
2.
Detection case in street mode
Motorcycle impact against a vehicle or solid
obstacle
The In&motion detection system (the "In&box") can
detect a fall when a powered two-wheeler hits a vehicle
at a speed higher than 25 km/h (16 mph), with an angle
between 4 and 135° at the time of impact.
Angles
of impact
detection