EN WELCOME! Thank you for choosing In&motion technology. The In&box is the detection device required to make the airbag system work and is only compatible with IN&MOTION airbag systems. This manual explains how to use this product correctly. For any questions regarding the In&box airbag system and its technology, please contact the IN&MOTION customer service, indicating your In&box number: customer@inemotion.com Find the phone number of your country on our website www.inemotion.
The In&box is designed to be used only with compatible products integrating the In&motion airbag system. Do not use with any other product or any other application that is not mentioned in the user manual supplied with the product integrating the In&motion airbag system. Each algorithm is designed to suit to a specific application (use on street, track). Make sure to activate the detection mode dedicated to your application to benefit from the best protection in case of a fall or accident.
EN IN&BOX User Manual 2019 - v4 Quick Start Guide ............................................ p.26 In&box Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.27 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.28 User Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
QUICK START GUIDE CONTENTS In&box: In&motion airbag system detection and triggering device containing the sensors and battery Standard USB cable In&box User Manual The user manual dedicated to the airbag system is supplied with the product integrating the In&motion airbag system.
EN IN&BOX BASICS MARKS (indicating the correct insertion into the vest) INFLATOR LED GPS LED ON/OFF Button BATTERY LED IN&BOX ON/OFF Switch button Inflator port Micro USB port 27
GETTING STARTED #1 CHARGE THE IN&BOX Use the USB cable included in your package, with a USB charger (not provided). For recommendations regarding the USB charger (not supplied), please refer to the “Charging” section of this manual. USB charger (not provided) USB cable (provided) #2 TURN ON YOUR IN&BOX Push the switch button ON If the switch button is already ON, quickly press twice on the central button. The In&box must be activated before use on my.inemotion.com in order to be functional.
EN #3 ACTIVATE YOUR IN&BOX For the first use only, activate your In&box and subscribe to an In&motion offer on my.inemotion.com. 1. Go to my.inemotion.com 2. Create your user account. 3. Activate your subscription to the In&motion club: choose your offer and payment method. 4. Download the mobile app «My In&box»* (available for iOS and Android). 5. Pair your In&box to your user account by following the mobile app instructions. 6.
#4 CONFIGURE YOUR WI-FI ACCESS POINT Regularly connecting your In&box to your Wi-Fi access point is really important in order to always benefit from the latest updates. It is essential to connect at least once a year for yearly subscriptions and once a month for monthly subscriptions. If not, the In&box will be automatically blocked and will no longer work until the next connection. From the first use, configure your Wi-Fi access point using the mobile app.
EN LOCK 1 ARROWS INSERT 2 In&box incorrectly inserted 3 In&box well inserted #6 WEAR YOUR AIRBAG PRODUCT To obtain the specifications related to your In&motion airbag system, please refer to the user manual provided with your product integrating the In&motion airbag system.
USER MANUAL GENERAL OVERVIEW #1 ACQUIRE AN AIRBAG SYSTEM To acquire a product integrating the In&motion airbag system, follow these steps: 1. Buy the product integrating the In&motion airbag system from a reseller. The In&box is available with the product in shops. 2. Subscribe to a membership (lease or buy) on my.inemotion.com 3. Activate your In&box. Once activated, the In&box is ready to be used all over the world for the entire duration of the membership selected.
EN • The pairing process starts: follow the instructions on the app. Your In&box is ready to be used! * If your phone is not compatible or if you cannot download the app, go to our website www.inemotion.com and follow the manual activation procedure. You will find the list of compatible phones in the “App” section of this manual. #3 IN&MOTION SUBSCRIPTION AND MEMBERSHIPS For any question regarding the In&motion subscription and memberships, please refer to our website my.inemotion.
This corresponds to approximately 1 week of autonomy in normal use (daily commute*). In&motion recommends switching off your In&box with the central button when it is not being used for several consecutive days to save the battery life. * Around 2h riding per day and “automatic standby” function the rest of the day. #2 IN&BOX FUNCTIONS The In&box has three different functions: 1.
EN Make sure to turn your In&box off when using any other transportation (car, bus, airplane, train or using a motorcycle but not wearing the airbag system). #3 LIGHTING CODE Below is a list of different LED colors that you may see on your In&box. Warning, this lighting code can change and evolve over time depending on the usage. In order to be aware of the latest evolutions, please refer to our website www.inemotion.
Solid blue or flashing blue: In&box synchronizing or updating.
EN WI-FI CONNECTION The two upper LEDs are flashing blue alternately: the In&box is seeking for a connection to your Wi-Fi access point. The two upper LEDs are flashing blue at the same time: the synchronization and updating process is in progress. Warning, do not use the side switch button to turn the In&box off when the LEDs are blue as it could disrupt the update process with risks for the In&box software! Compatible Wi-Fi access points: Wi-Fi b/g/n with WPA/WPA2/WEP protection.
TECHNICAL INFORMATION CHARGING Electrical characteristics: Input: 5 V 2A Compatible charger: Use a EN60950-1 or EN62368-1 compliant USB charger. Altitude restrictions: Above 2000 metres (6561 feet) high, make sure that your charger is approved for this altitude before charging your In&box. Battery replacement: Do not try to replace the In&box battery by yourself, you could damage the battery, which may in turn lead to overheating, fire and injury.
EN Bluetooth LE mode Radio Frequency (RF) Exposure Compliance of Radiocommunication portable apparatus This device complies with FCC and ISED Canada RF radiation exposure limits set forth for general population (uncontrolled exposure). This device must not be collocated or operating in conjunction with any other antenna or transmitter.
RECYCLING Instructions regarding the product’s end-of-life: The symbol opposite indicates that in accordance with your local laws and regulations, you must dispose of this product/battery separately from household waste. When the product’s validity expires, please bring it to a collection system designated by local authorities.
CERTIFICATIONS CE certification: In&motion declares that the In&box complies with the essential requirements and other relevant provisions of the RED directives (Radio Equipment Directive) 2014/53/EU and RoHS 2011/65/EU. A copy of the Declaration of Conformity for the European Union is available at the following address: https://my.inemotion.com/documents/moto/ declaration_of_conformity.
EN equipment off and on, the user is encouraged to try to correct interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
WARNINGS #1 IN&MOTION AIRBAG SYSTEM USE The In&motion airbag system is a new, intelligent device that must be used only for the application to which it is dedicated, depending on the detection mode dedicated to this practice. Do not use it for any other application that would not correspond to the detection mode selected (use on street, track).
EN Any warranty required by applicable law is limited to 2 years from the date of purchase (for In&box acquisitions) and applies only to the original user. For In&box leases, a dedicated customer service representative is available allowing In&box exchanges if the problem cannot be solved remotely. This warranty is limited to the original user. The In&box is personal and cannot be lent or sold.
1. Use modes In&motion has developed two detection modes: • Street mode: use on roads; • Track mode: use on regulated closed circuits. The selection of the detection mode is carried out under the sole responsibility of the user who must make sure before each use that he/she has selected the right detection mode according to his/her use. The detection modes are designed to address risks specific to the intended use environment. As a result, the modes offer protection against different events (e.g.
EN 3. Detection case in track mode (regulated circuit) In order to benefit from the "track" mode detection cases, the user must activate the "track" mode first by subscribing to the dedicated offer. This dedicated offer is available on the In&motion website. High side The In&motion detection system ("In&box") can detect a "high side" type fall: when the motorcyclist is propelled in the air and towards the front of his/her motorcycle after a tire stall at a speed higher than or equal to 50 km/h (31 mph).
system doesn't detect or detects the GPS signal poorly, the system’s degree of detection is not at the level of performance achieved with an optimal GPS signal—thus airbag triggering is not guaranteed. [Warning] The detection system only works if the In&box is correctly charged. The lighting code of the In&box LEDS allows the user to make sure that the In&box has been correctly charged. Battery consumption needs to be monitored by the user to ensure that the trigger system remains active during the journey.
