Installation Manual

in-lite INSTALLATION MANUAL SMART BRIDGE
www.in-lite.com 01-12-2021
Contents
1x SMART BRIDGE
Input: 12V DC, max. 1A.
Frequency: 2400-2480 MHz, max. 20 dBm.
1x POWER ADAPTER
Input: 230V AC, 50 Hz.
Output: 12V DC, max 1A.
1x SCREW
1x ETHERNET UTP CABLE, max. 1m.
Or,
1x SMART BRIDGE 120V
Input: 12V DC, max. 1A.
Frequency: 2400-2480 MHz, max. 20 dBm.
1x POWER ADAPTER 120V
Input: 120V AC, 60 Hz.
Output: 12V DC, max 1A.
1x SCREW
1x ETHERNET UTP-CABLE, max. 1m.
Please read the following instructions before installing. You are advised
to keep these installation instructions in a safe place. Although a low
voltage system is safe, we advise you to have a qualified electrician
check the installation.
Use
The SMART BRIDGE is controlled by the in-lite app, suitable for Android and iOS
phones or tablets produced, for example, by Samsung and Apple. At the same
time the SMART BRIDGE can also be controlled by a “smart home” app like Apple
Homekit or Google Home. All control is done in the application and none has to
be done physically on the SMART BRIDGE. The only physical button available is a
reset button.
Bluetooth Low Energy
The transformer connects to the in-lite SMART HUB via Bluetooth Low Energy
(BLE) and this way it can communicate and control.
Ethernet
The SMART BRIDGE is connected to the ethernet via a UTP cable. Via a server in
the cloud a user can interact with the SMART BRIDGE at long distance, as long
there is an internet connection by the device like a smart phone or tablet.