Installation Manual

in-lite INSTALLATION MANUAL BIG SCOPE TONE
www.in-lite.com 07-05-2021
Installation step by step
Step 1
Open the package. Here you will find the lamp and the other items. Disconnect
the bracket from the lamp.
Step 2
Take the groundstake and connect the bracket to it.
Step 3
Connect the lamp to the bracket again.
Step 4
Find the right spotfot the lamp and mount it by putting the groundstake nto the
soil/gravel.
Step 5
Another option is to mount the bracket to a wall. No groundstake necessary.
Install the screw plug after drilling a hole for the screw and wall plug.
Step 6
Connect the lamp to the bracket again. Put the cable through the hole for the
wall plug.
Step 7
Put the wall plug around the cable.
Step 8
Now you can put the wall plug into the hole to close the gap.
Step 9
Connect the Easylock to the lamp cable.
Step 10
Check the cable connection again to be sure you have a proper, tight fit.
Step 11-15
Connect the in-lite Easylock.
Step 16
Check if the light is “ON”. In case it’s still “OFF”, check if the SMART HUB is
turned “ON” and repeat step 9-15.