User Manual

- 5 -

PIO-48.PC104 User Manual

IRQ Selection

The PIO-48.PC104 has an interrupt selection jumper, which should be set prior to

use, if an interrupt is required by your application software. Consult the user manual

for the application software being used to determine the proper setting.

IRQ3

IRQ4

IRQ7

IRQ5

IRQ9

IRQ10

IRQ11

IRQ12

IRQ15

Note: The supplied driver for Windows and does not require, nor does it support

interrupts. It is recommended that this jumper be removed to prevent any resource

conflicts.