Manual

Dimensions
Packing List
PACSmate® Series medical LCD monitor
Monitor stand
Power Cord (US x 1, EU x 1)
Power Adapter
Dual-link DVI-D Signal Cable
USB Cable
Utility CD-ROM
(for user's manual and software utility)
Ordering information
Specications
PACSmate® MMD-4300C
Drive System a-Si TFT active matrix
Display area (H x V) 641.3mm x 400.8 mm
Diagonal size of display 75.6cm (30.0 inches)
Resolution (H x V) 2560 x 1600
Pixel pitch (H x V) 0.2505mm x 0.2505 mm
Sub-pixel pitch (H x V) 0.0835mm x 0.2505 mm
Pixel format RGB (Red dot, Green dot, Blue dot) vertical stripe
Luminace-max. 370cd/m
2
Max. Luminance (calibrated) 250cd/m
2
Contrast ratio 1000:1 (typical)
Viewing angle Right: 178°, Left: 178°, Up: 178° , Down: 178°
Response time (Ton + Toff) 12ms (typical)
Polarizer surface/ hardness Antiglare/ 3H
Backlight 16 CCFL
Default gamma Gamma 2.2
LUT 10-bit for each RGB
Signal input
Master: Dual link DVI-D (digital)
Slave: Single link DVI-D (digital)
USB 2.0 hub 1 upstream/ 2 downstream
Membrane keypad Yes
Power adapter
Input voltage range
100VAC-240VAC
Power adapter
Input frequency range
47Hz-63Hz
Power adapter
Input AC current
2.0A max. at 90VAC
Power adapter
Power output
24VDC, 6.25A, 150W (max)
Physical dimensions
(H x W x D)
With stand: 522mmx 736mm x 266 mm (landscape)
Without stand: 480mm x 736mm x 76 mm (landscape)
Weight 15kg
Operating temperature 10°C~35°C
Storage temperature 0°C~45°C
Operation relative humidity 30% ~75% Non-condensing
Storage/ Transportation
Relative humidity
10% ~95% Non-condensing
DICOM
Gamma 2.2 Gamma 2.0 Gamma 1.8
User Selectable Gamma Settings and Color Temperature
Settings
PACSmate provides you with exible Gamma settings and color temperature
settings for side-by-side image comparison in dual-viewing modes. The
independent Gamma settings (for Gamma 1.8,2.0,2.2) and color temperature
settings (6500K, 9300K) consist of multiple user-selectable settings,
providing exible display modes for images from different modalities.
Color Temperature Settings
Built-in Front Sensor for DICOM Conformance Testing
PACSmate has designed a built-in, front-mounted sensor which continually
adjusts the luminance output to ensure consistent images over time.
Auto-Dimming for Ambient Light Adjustment
The auto-dimming function helps create better diagnostic experience under
proper light condition and extend backlight lifetime
IPX2 Compliance
The whole enclosure of MMD-4300C is compliant with IPX2 waterproof
standard.The MMD-4300C can be used in the operating room where is
humid and waterproof is considered important.
Built-in Front Sensor
Well-Lit Room Dim-Lit Room
Part No. Description
MMD-4300C
4 megapixel, 30" color LCD monitor with IPX2 housing
MMD-4300CX
4 megapixel, 30" color LCD monitor with IPXX housing
4MP
4MP