Manual

Dimensions
Packing List
PACSmate® Series medical LCD monitor
Monitor stand
Power Cord (US x 1, EU x 1)
Power Adapter
Dual-link DVI-D Signal Cable
USB Cable
GeniSPOT® USB Calibrator
Utility CD-ROM
(for user's manual, software utility, and GeniPASS® QC software)
Ordering information
Ergonomic Design
Narrow bezels enable seamless side-by-side viewing for diagnostic
applications.
Pairing Monitors
PACSmate provides a pair matching service for dual-head display
applications, allowing image comparison for diagnostic practices.
GeniSPOT® & GeniPASS® QC Solution
Packed in every PACSmate monitor, the GeniSPOT® 3-in-1 calibration
system and GeniPASS® QC utility ensures the display conforms with AAPM,
DIN, JIS and IEC standards all the time.
Functions:
• Luminance testing
• DICOM calibration
• Luminance auto-dimming
• GeniSPOT® self-diagnosis
• Five-point testing of uniformity
GeniSPOT®DICOM
Calibration
Smart Software OSD
The smartOSD is an intelligent and easy to use proprietary On-Screen
Display (OSD) software especially designed for the PACSmate display
monitors. It delivers excellent performance and exibility over hardware
OSD solutions in the monitor unit. Users can adjust the monitor with the
smartOSD in a Windows® environment from the remote system instead of
adjustment from front panel.
The smartOSD allows some functions as below :
• Power on/off • Luminance selection
• Graphic card mode selection • GrayBoost® on/off
• DICOM Look-Up-Table selection • Monitor Information
Specications
PACSmate® Model MMD-2213M
Drive System a-Si TFT active matrix
Display area (H x V) 433.2mm x 324.9 mm
Diagonal size of display 54cm (21.3 inches)
Resolution (H x V) 1600 x 1200
Pixel pitch (H x V) 0.270mm x 0.270 mm
Sub-pixel pitch (H x V) 0.090mm x 0.270 mm
Pixel format 1 pixel consists of 3 sub-pixels, LCR vertical stripe
Luminace-max. 1000cd/m
2
Max. luminance (calibrated) 600cd/m
2
White chromaticity Wx, Wy=(0.280, 0.304) (typical)
Contrast ratio 700:1 (typical)
Viewing angle Right 85°, Left 85°, Up 85°, Down 85° (10:1 contrast)
Response time (Ton + Toff) 35ms (typical)
Polarizer surface/ hardness Antiglare/ 2H
Backlight 6 CCFL
Default gamma DICOM
Grayscale Simultaneous 12-bit
LUT 12-bit
Signal input Single link DVI-D (digital)
USB 2.0 hub 1 upstream/ 2 downstream
Membrane keypad Yes
Power adapter Input voltage range 100VAC - 240VAC
Power adapter Input frequency
range
47Hz-63Hz
Power adapter Input AC current 1.25A-0.5A
Power adapter Power output 12VDC, 8.33A, 100W (max)
Physical dimensions (H x W x D)
With stand: 520mm x 380mm x 274 mm (portrait)
Without stand: 485mm x 380mm x 100 mm (portrait)
Adjustable height range (with
stand)
Portrait: 520mm~590 mm
Landscape: 465mm~535 mm
Weight (with stand) 13.2kg
Operating temperature 10°C~35°C
Storage temperature 0°C~45°C
Operation relative humidity 30% ~75% Non-condensing
Storage/ Transportation
Relative humidity
10% ~95% Non-condensing
Part No. Description
MMD-2213M
2 megapixel, 21.3" monochrome LCD
monitor includes GeniSPOT® and
GeniPASS® calibration kit
2MP