MAQ 20 ® Industrial Data Acquisition & Control System Factory and Process Automation Machine Automation Military and Aerospace Power and Energy Environmental Monitoring Oil and Gas ETHERNET USB RS-232 RS-485
Flexible, Powerful, High Performance... MAQ®20 Industrial Data Acquisition & Control System The MAQ®20 Industrial Data Acquisition and Control System encompasses more than 25 years of design excellence and quality in the process control industry. The initial offering in this high performance and highly flexible system is a family of DIN rail mounted, programmable, multi-channel, industrially rugged signal conditioning input and output modules and communication modules.
Communication Modules are offered in two models covering Analog Input Modules interface to a wide range of standard standard industrial buses: Ethernet, RS-232, RS-485, and USB. Host software interfaces to the system using the Modbus TCP or RTU protocol. When using the Ethernet interface, up to four simultaneous socket connections are supported and each socket can process up to four simultaneous Modbus TCP transactions. Serial communications over RS-232 or RS-485 can be run at baud rates as fast as 921.
Specifications: Strain Gage Input Modules - Preliminary Typical at TA = +25°C and +24VDC system power Model Number MAQ20-BRDGN MAQ20-BRDGW Number of Channels Per Channel Setup Input Range Excitation Full bridge, Narrow bandwidth Full bridge, Wide bandwidth 4 Individually configurable for range, alarm limits, averaging ±10mV to ±100mV 10.0V CMR NMR (MAQ20-BRDGN) 100dB at 50Hz or 60Hz 20dB at 50Hz or 60Hz ±0.
Analog Output Process Current and Voltage Output Modules are offered with 4-20mA and 0-20mA process current output or up to ±10V voltage output with drive capability; they control motors, drive valves and perform many other crucial process operations. Up to eight channels of output on the modules results in physically small control systems and low cost per channel.
The System Backbone resides within the DIN rail used for module mounting and provides power to and interface between the communication module and the I/O modules. Standard backbones provide for one communication module and 4, 8, 16, or 24 I/O modules. The longest backbone, which accommodates 24 I/O modules, fits in an industry standard 19” rack. Each backbone utilizes a pluggable connector system on each end such that varying system channel counts can be configured using the standard backbones.
ReDAQ® Shape for MAQ®20 Software Dataforth offers ReDAQ® Shape for MAQ®20 software as the easiest and most efficient development tool for use with the MAQ®20 Industrial Data Acquisition and Control System. This out-ofthe-box software enables users to create, save, and open graphical user interface projects for test, process, data collection and data analysis applications. Built-in functions in the Acquire and Analyze panels are pre-configured and can be used without setup.
High Performance Industrial Signal Conditioning, Data Acquisition, and Data Communication Products Since 1984 WORLD HEADQUARTERS Dataforth Corporation 3331 E. Hemisphere Loop Tucson, AZ 85706 USA Toll Free: 800-444-7644 Tel: 520-741-1404 Fax: 520-741-0762 Email: sales@dataforth.com www.dataforth.com Dataforth Europe Tel: +49.8631.308111 Fax: +49.8631.308118 Email: datafortheurope@dataforth.eu www.dataforth.eu Dataforth Asia Tel: 949-829-3678 Email: dataforthasia@dataforth.com www.dataforth.com.
