Instruction Manual

ManualsBrandsImpulse ManualsComputer AccessoriesBT8422

B-TECH AUDIO VIDEO MOUNTS

www.btechavmounts.com

CONTENTS

TOOLS REQUIRED

FEATURES

BT8422

UNIVERSAL FLAT PANEL WALL MOUNT

INSTALLATION GUIDE & PARTS LIST

This Pack Contains 1 Mount

Installation Safety Notes.....................................................................................................................2

Parts List.............................................................................................................................................4

Installation Instructions.......................................................................................................................6

Optional Accessories........................................................................................................................10

Product Dimensions..........................................................................................................................11

B-Tech Contact Details.....................................................................................................................12

PLEASE KEEP THIS FOR FUTURE REFERENCE

Level

(optional)

13mm (1/2")

spanner or socket

Stud finder

(optional)

Pencil

10mm (7/16")

masonry bit or 6mm

(1/4") wood bit

Drill

Crosshead

screwdriver

● Designed for flat screens up to

65” (165cm) / 70kg (154lbs)

● Fits screens with VESA and non-VESA

mounting patterns

● Low profile design mounts screen only

30mm (1.2”) from wall

● Suitable for concrete / brick or up to 32” stud walls

● Simple ‘hook on’ installation with all mounting

hardware included

COMMUNITY DESIGN NO. 001713280-0034

REG DESIGN NO: 3021713

Summary of content (12 pages)

PAGE 1
BT8422 UNIVERSAL FLAT PANEL WALL MOUNT INSTALLATION GUIDE & PARTS LIST This Pack Contains 1 Mount PLEASE KEEP THIS FOR FUTURE REFERENCE FEATURES ● ● ● ● ● Designed for flat screens up to 65” (165cm) / 70kg (154lbs) Fits screens with VESA and non-VESA mounting patterns Low profile design mounts screen only 30mm (1.2”) from wall Suitable for concrete / brick or up to 32” stud walls Simple ‘hook on’ installation with all mounting hardware included COMMUNITY DESIGN NO.
PAGE 2
INSTALLATION SAFETY INSTRUCTIONS CAUTION: This wall mount is intended for use only with the maximum weights indicated. Use with flat screens heavier than the maximum indicated may result in instability causing possible injury. Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference.
PAGE 3
CS Společnost B-Tech International Ltd. doporučuje provést instalaci tohoto produktu prostřednictvím odborného instalátora AV či jinak způsobilé osoby. Společnost B-Tech International Ltd, její distributoři a prodejci nenesou odpovědnost za škody nebo zranění způsobená nevhodnou instalací. Tento výrobek je nutno umístit do vhodné konstrukce a používat jen po uvedenou maximální výšku. DE B-Tech International Ltd.
PAGE 4
BT8422 PARTS LIST 5 Suitable for loads up to 70kg (155lbs) 1 3 4 7 2 Wall Plate 4 6 Interface Assembly
PAGE 5
A B REF M D C E H QTY WALL PLATE 1 2 INTERFACE ARM A 1 3 INTERFACE ARM B 1 4 LOCKING BAR 1 5 M6 X 10mm GRUB SCREW 2 6 HANDWHEEL (TO LEVEL SCREEN) 2 7 PROTECTIVE PAD (FOR PART 6) 2 8 3mm HEX KEY (FOR PART 5) 1 A M4 X 12mm SCREW B M4 X 25mm SCREW 4 C M5 X 16mm SCREW 4 D M5 X 25mm SCREW 4 E M6 X 16mm SCREW 4 F M6 X 25mm SCREW 4 G M8 X 16mm SCREW 4 H M8 X 25mm SCREW 4 I M8 X 40mm SCREW 4 J 12mm SPACER (FOR PARTS B, D AND F) 4 INTERFACE KIT F N G PART
PAGE 6
INSTALLATION INSTRUCTIONS 1 Attach wall plate to either a concrete or stud wall. i. Concrete/brick wall. I A3 10mm (7/16) masonry bit A2 A1 ii. Stud wall.
PAGE 7
2 A Attach interface arms to flat screen using interface kit.
PAGE 8
3 Attach levelling wheels and protective pads to arms. 3 6 7 2 4 Hook flat screen onto wall bracket and postion (this may require two people).
PAGE 9
5 Insert locking bar. FLAT SCREEN 1 Secure with padlock (not supplied) 4 6 Secure the screen in position.
PAGE 10
7 Adjust levelling wheels. WALL FLAT SCREEN OPTIONAL ACCESSORIES B-Tech AV Component Shelves & Cable Management.
PAGE 11
BT8422 PRODUCT DIMENSIONS 873mm 34.4" 30mm 1.2" MAX 550mm 21.7" 500mm 19.7" 40mm 1.6" MAX 825mm 32.5" WALL PLATE 104mm 4.1" 726mm 28.6" 103mm 4.1" 24mm 0.9" 830mm MAX 32.7" 622mm 24.5" 415mm 16.3" 208mm 8.2" THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
PAGE 12
www.btechavmounts.com B-TECH AUDIO VIDEO MOUNTS HEAD OFFICE Bennett House, Long March, Daventry, Northants., NN11 4NR, UK Email: info@btechavmounts.co.uk EUROPE BELGIUM Brixtonlaan 32, Zaventem 1930, Brussels, Belgium Email: info@btechproav.com NORTH AMERICA 203 Eggert Road, Buffalo, NY 14215, USA Email: info@btechavmounts.com GERMANY Dyrotzer Weg 26A, 14612 Falkensee, Berlin, Germany Email: info@btechdeutschland.com SINGAPORE Ruby Industrial Complex, Singapore 347740 Email: info@btechavmounts.com.