Manual

Programmable Automation Controllers
APAX-5090P
APAX-5095P
4-port RS-232/422/485
Communication Module
2-port CANopen
Communication Module
RoHS
COMPLIANT
2002/95/EC
RoHS
COMPLIANT
2002/95/EC
APAX-5090P
APAX-5095P
Specifications
General
 Certifications CE, FCC class A
 Interface COM 1, COM 2: RS-422/485
COM 3, COM 4: RS-232/422/485
 Connectors 1 x 26-pin clamp-type terminal
 Dimensions (W x H x D) 30 x 139 x 100 mm
 Enclosure ABS+PC
 Weight 180 g
 Power Consumption 2 W @ 5 V
DC
(typical)
Communications
 Data Bits 5, 6, 7, 8
 Stop Bits 1, 1.5, 2
 Parity None, even, odd
 Baud Rate 50 bps ~ 230.4 kbps
 Data Signals RS-232: TxD, RxD, RTS, CTS, GND
RS-422: Tx+, Tx-, Rx+, RX-
RS-485: Data+, Data-
 FIFO 128 bytes
 Flow Control RTS/CTS, Xon/Xoff
Protection
 ESD Protection 15 kV
 EFT Protection 2,500 V
DC
 Isolation Protection 2,500 V
DC
(between COM port and
backplane)
Environment
 Operating Temperature 0 ~ 60° C (mounted vertically)
 Storage Temperature -40 ~ 70° C
 Relative Humidity 5 ~ 95% (non-condensing)
Ordering Information
 APAX-5090P-AE 4-port RS-232/422/485 Comm. Module
Note: APAX-5090P can only be used by controllers with a PCI interface
Specifications
General
 Certifications CE, FCC class A
 Interface 2 x CAN Bus
 Connectors DB9
 Dimensions (W x H x D) 30 x 139 x 100 mm
 Enclosure ABS+PC
 Weight 180 g
 Power Consumption 2 W @ 5 V
DC
(typical)
Communications
 Protocol CANopen
 Speed Max. 1 Mbits/s
 Supports PDO transmission mode
 Supports NMT and SDO communication object
 Supports Heartbeat producer and consumer
 Supports Emergency objects
Protection
 Isolation Protection 2,500 V
DC
Environment
 Operating Temperature 0 ~ 60° C (mounted vertically)
 Storage Temperature -40 ~ 70° C
 Relative Humidity 5 ~ 95% (non-condensing)
Ordering Information
 APAX-5095P-AE 2-port CANopen Module
Note: APAX-5095P can only be used by controllers with a PCI interface
NEW NEW