User Manual

- 4 -

SEALINK DIO-16 User Manual

Physical Installation

The SeaLINK DIO-16 can be installed in any open USB port.

Do not plug the unit into a USB port until the software has been fully installed.

1. Simply connect the SeaLINK DIO-16 to your USB port with the supplied

cable.

2. The software drivers installed during setup will automatically recognize and

configure the device.

3. You should see one or more “New Hardware Found” windows, indicating

the actual device being created.

4. Next, view your system’s Device Manager.

5. You should have a new ‘SeaIO 8209’ in the SeaI/O Device heading

indicating the installation was successful.

The SEALINK DIO-16 is now ready for use.