User Manual User Manual

- 4 -

SEALINK REL-16 User Manual

Physical Installation

The SeaLINK REL-16 can be installed in any open USB port.

Do not plug the unit into a USB port until the software has been fully

installed.

1. Simply connect the SeaLINK REL-16 to your USB port with the supplied

cable.

2. The software drivers installed during setup will automatically recognize and

configure the device.

3. You should see one or more “New Hardware Found” windows, indicating

the actual device being created.

4. Next, view your system’s Device Manager.

5. You should have a new ‘SeaIO 8208’ in the SeaI/O Device heading

indicating the installation was successful.

The SEALINK REL-16 is now ready for use.