User Manual Manual

- 5 -

SeaLINK PIO-48 User Manual

Physical Installation

The SeaLINK PIO-48 can be installed in any open USB port.

Do not plug the unit into a USB port until the software has been fully

installed.

1. Simply connect the SeaLINK PIO-48 to your USB port with the supplied

cable.

2. The software drivers installed during setup will automatically recognize and

configure the device.

3. You should see one or more “New Hardware Found” windows, indicating

the actual device being created.

4. Next, view your system’s Device Manager.

5. You should have a new ‘SeaIO 8203’ in the SeaI/O Device heading

indicating the installation was successful.

The SeaLINK PIO-48 is now ready for use.