User Manual

- 5 -

REL-32.PCI User Manual

Physical Installation

The adapter can be installed in any 5V PCI expansion slot.

Do not install the Adapter in the machine until the software has been fully

installed.

1. Turn off PC power. Disconnect the power cord.

2. Remove the PC case cover.

3. Locate an available 5V PCI slot and remove the blank metal slot cover.

4. Gently insert the PCI adapter into the slot. Make sure that the adapter is

seated properly.

5. After the adapter has been installed, the cables should be routed thru the

opening in the bracket. This bracket also features a strain relief function that

should be used to prevent un-expected cable removal.

6. Replace the screw you removed for the blank and use it to secure the adapter

into the slot. (This is required to ensure FCC Part 15 compliance.)

7. Replace the cover.

8. Connect the power cord

The REL-32.PCI is now ready for use.