Owner's manual

Mounting Options
SeaI/O Mounting Kit
Expanding your I/O count is as simple as adding
N-Series expansion units to the Base SeaI/O
module (or other N-series modules). Each N-
Series module includes an expansion and strap kit
(Item# KT122), which includes a 5” CAT5
interconnect cable, four metal straps, and four #4-
40 metal screws. The image shows a SeaI/O stack
configuration using the expansion kit.
DIN Rail Mounting
All SeaI/O modules are available with a factory-
installed DIN-rail mounting clip. Alternatively
DIN-rail mounting clips can be ordered as a field
upgrade kit (Item# DR104). The bracket with clip
is easily attached using two included #4-40
Phillips head machine screws.
Table/Wall Mounting
The flush mount bracket kit (Item# KT123) is
extremely versatile and can be used to mount
SeaI/O modules from the top, bottom, or back
edge. Individual modules or a stack of SeaI/O
modules can be mounted flat to a tabletop,
underneath a counter, or inside an enclosure. The
kit can be used to mount SeaI/O modules flat to a
wall, or along the back edge, similar to DIN-rail
mounting options.
Universal Mounting Bracket
The universal mounting bracket (Item# KT125)
can be used as a “backpack” to mount power
supplies and other devices to SeaI/O modules. The
bracket has holes for both 75mm and 100mm
VESA mounting options. The universal
arrangement of slots and holes accept bolt sizes to
M4 and can be used for virtually any mounting
configuration.
© Sealevel Systems, Inc.
- 73 -
SeaI/O User Manual