Owner's manual

Connector Pin Outs

SeaI/O (RS-232) S-Series Modules

SeaI/O S-Series (RS-232) modules have an RJ45 connector on the face of the

enclosure. Each S-series module includes a kit (item# KT119) to convert the RJ45

RS-232 pin out to a standard DB9 RS-232 pin out. The kit ships with a DB-9F to

RJ45 modular adapter (item# DB109) with RS-232 pin out and a standard 7' CAT5

patch cable (item# CA246). This kit allows SeaI/O S-series modules to be easily

connected to a standard DB9 RS-232 serial port. For other interfacing options, the

RJ45 serial pin out is shown below.

NOTE:

For SeaI/O S-series modules, pin 4 of the RJ45 connector outputs

5VDC @300mA. This is useful for powering the wireless

Bluetooth adapter (Sealevel Item# BT-SD100). This allows any

Bluetooth capable host to access a SeaI/O module as easily as

communicating with a standard RS-232 serial port.

- 72 -

SeaI/O User Manual