Owner's manual

Digital I/O Tab
The “Digital IO” tab of MaxSSD is displayed when using Sealevel I/O devices
featuring discrete inputs and outputs. It displays the device’s current input and/or
output status in an intuitive and usable manner.
When displaying SeaI/O or SeaDAC modules (excluding SeaDAC Lite), the “Digital
IO” tab displays inputs and outputs in groupings (or banks) of eight. Therefore, a
Sealevel I/O device with 16 inputs and 8 outputs would show two banks of inputs and
one bank of outputs.
When banks of inputs are displayed, the status LEDs update on each of the banks
automatically. This allows you to actively monitor external signals.
With a bank of outputs, the output coils can be set using the buttons below each
output LED. As each coil is set, the I/O module is read. The corresponding status
LED in the “Digital IO” window indicates the state of the coil. In the example
below, a SeaI/O module with 16 Reed relays is shown.
© Sealevel Systems, Inc.
- 28 -
SeaI/O User Manual