Manual

- 4 -

ACB-MP.PCI User Manual

Physical Installation

The adapter can be installed in any 5V PCI expansion slot.

Do not install the adapter in the machine until the software has been fully

installed.

1. Turn off power. Disconnect the power cord.

2. Remove the PC case cover.

3. Locate an available PCI slot and remove the blank metal slot cover.

4. Gently insert the PCI adapter into the slot. Make sure the adapter is seated

properly.

5. Replace the screw (required for FCC Part 15 compliance).

6. Replace the cover.

7. Connect the power cord and power up the machine.

The ACB-MP.PCI is now ready for use.