Manual

© Sealevel Systems, Inc.
- 2 -
ACB-MP.PCI User Manual
Before You Get Started
What’s Included
The ACB-MP.PCI is shipped with the following items. If any of these items is
missing or damaged please contact Sealevel for replacement.
 Item# 5102 – ACB-MP.PCI Adapter
 Item# SSI-CD – Sealevel Software CD with SeaMAC drivers
Optional Items
Depending upon your application, you are likely to find one or more of the following
items useful for interfacing the ACB-MP.PCI to real-world signals. All items can be
purchased from our website (http://www.sealevel.com
) or by calling 864-843-4343.
 CA104 – A 6’ serial extension cable with one DB-25 female connector and one
DB-25 male connector, pinned one-to-one.
 CA107 – a 10” shielded cabling adapter with a DB-25F (RS-530) to a DB-37M
(RS-449 DTE). RS-530 is replacing RS-449 in Telecom applications, but there is
still a very large installed base of equipment that still uses the RS-449 pin-out.
Both standards use RS-422 to define the electrical specifications and are
interchangeable via this adapter cable.
 CA159 – A 6’ shielded cable with a DB-25 female connector (RS-530 pin out) to
a DB-15 male connector (X.21 pin out) that converts the standard DB-25
implementation of RS-530 or RS-422 to the ITU-T X.21 standard.
 CA174 – A 6’ serial extension cable with twisted data pairs for increased data
integrity. Recommended for high-speed RS-530 connections.
 CA178 – A 6’ shielded cable with a DB-25 female connector to an ITU-T ISO-
2593 style connector (V.35) that converts the Sealevel DB-25 implementation to
the ITU-T V.35 mechanical standard.