Manual

APPENDIX D - ASYNCHRONOUS COMMUNICATIONS ............ 23
APPENDIX E - SILK-SCREEN ................................................. 24
APPENDIX F - COMPLIANCE NOTICES .................................. 25
FEDERAL COMMUNICATIONS COMMISSION STATEMENT ..............25
EMC DIRECTIVE STATEMENT ......................................................25
WARRANTY............................................................................ 26
Figures
Figure 1 - Available Address Combinations ............................................2
Figure 2 - Address Selection Table...........................................................3
Figure 3 - Port to Connector Table ..........................................................3
Figure 4 - Header J1A, Normal IRQ Mode .............................................5
Figure 5 - Header J1A & J2A, Shared IRQ Mode..................................5
Figure 6- Headers J1D- J4D, RS-422 .......................................................7
Figure 7 - Headers J1D- J4D, RS-485 ‘Auto’ Enabled, with ‘No Echo’7
Figure 8 - Headers J1D- J4D, RS-485 ‘Auto’ Enabled, with ‘Echo’ .....7
Figure 9 - Headers J1D- J4D, RS-485 ‘RTS’ Enabled, with ‘No Echo’ 8
Figure 10 - Headers J1D- J4D, RS-485 ‘RTS’ Enabled, with ‘Echo’....8
Figure 11 - Headers J1E - J4E, Line Termination ..................................9
Figure 12 - Clocking Mode 'Divide By 4’...............................................10
Figure 13 - Clocking Mode 'Divide By 2’...............................................10
Figure 14 - Clocking Mode 'Divide By 1’...............................................10
Figure 15 - Asynchronous Communications Bit Diagram....................23
©Sealevel Systems, Inc.
SL9146 Revision 7/2006
Sealevel Systems, Incorporated. All rights reserved.