User Manual

Installation
Sealevel Systems ULTRA-485 Page 10
Installation
Operating System Installation
For Windows Users
Start by choosing Install Software at the beginning of the CD. Choose
Asynchronous COM: Port Software, SeaCOM.
Other Operating Systems
Refer to the appropriate section of the Serial Utilities Software.System
Installation
The ULTRA 485 can be installed in any of the PC expansion slots. The ULTRA
485 contains several jumper straps for each port that must be set for proper
operation.
1. Turn off PC power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available slot and remove the blank metal slot cover.
4. Gently insert the ULTRA 485 into the slot. Make sure that the adapter is
seated properly.
5. Replace the screw.
6. Replace the cover.
7. Connect the power cord.
Installation is complete.