User guide

- 3 -

SeaLINK+16.VC User Manual

Software Installation

Windows 98/ME/2000/XP

Do not connect the device to a USB port until the software has been fully

installed.

1. Start Windows.

2. Insert the Sealevel Systems CD in to your CD drive.

3. If ‘Auto-Start’ is enabled for this drive the software will automatically launch.

Otherwise, point your browser to the ‘Index.htm’ on the root directory of the CD

4. Select ‘Install Software’.

5. Select the Part Number for your adapter from the listing.

6. Select ‘Windows 98/ME/2000/XP’. The setup file will automatically detect the

operating environment and install the proper components. Next (depending on

the OS version) select the ‘Run this program from its current location’ or ‘Open’

option. Follow the information presented on the screens that follow.

7. A screen may appear with the declaration: “The publisher cannot be determined

due to the problems below: Authenticode signature not found.” Please select the

‘Yes’ button and proceed with the installation. This declaration simply means

that the Operating System is not aware of the driver being loaded. It will not

cause any harm to your system.

8. During setup the user may specify installation directories and other preferred

configurations. This program also adds entries to the system registry that are

necessary for specifying the operating parameters for each driver. An uninstall

option is also included to remove all registry/INI file entries from the system.

Windows NT Note: Windows NT is not USB aware and thus cannot support this

device.

Party Software Support

Third party software support for many HMI/MMI and other process control software

is included on the product installation CD. For the most up to date information on

third party software support, please visit

http://www.sealevel.com/thirdpartysoftware.asp.