User's Manual

Speedway Revolution Installation and Operations Guide Octane 4.11
Appendix C: Speedway xPortal Installation
64 Revision 4.11 Copyright ©2014, Impinj, Inc.
If an Antenna Hub displays an error or is not connected properly, the green check on the
connected Antenna Hub will be replaced by a red X or caution icon as explained in the key
on the bottom right of the page.
Figure D.4 Antenna Hub Confirmations
The table below describes the Antenna Hub icons and their meanings.
Table D-1 Antenna Hub Connection Icons
Icon
Icon Label
Meaning

Connected
The cable is correctly connected.
X
Cabling Error
The cable is either not connected or
incorrectly connected.
Init Error
An error occurred while initializing the hub.
RF Cable
Connect RF cables at indicated locations
Cat5 Cable
Connect Cat5 cables at indicated locations.