User's Manual

Speedway Revolution Installation and Operations Guide Octane 4.11

Chapter 2: Installing and Connecting

Figure 2.5 Speedway Revolution Serial Connection

3. Power up the Reader and wait for the boot sequence to complete. (See Step 3:

Power the Reader on page 12.)

4. On the PC, run the Putty application and select the Serial connection option. Verify

that Serial line to connect to is set to COM1 (may be another COM port if you are

using a serial to USB adapter)

5. Set Speed to 115200.

6. Set Flow control to None.

Figure 2.6 Putty Configuration Settings

7. Select Open. The RShell console window opens.

8. Press Enter. The RShell login prompt displays.