Operation Manual

Cleaning catalytic liners by using
high oven temperatures
Heating the oven to a high temperature
will help remove soiling caused by oil
and grease splashes from the catalytic
surfaces.
Before cleaning the catalytic liners
using high temperatures, make sure
that all PerfectClean surfaces have
been cleaned as previously
described. Otherwise the high
temperatures can cause deposits on
PerfectClean surfaces to bake on
harder and become impossible to
remove.
^
Take all accessories out of the oven.
^
Select Fan heat D.
^
Select the highest temperature
setting.
Run the oven for approx. 1 hour. The
length of time will depend on the level
of soiling.
Any remaining soiling will gradually
disappear with each subsequent use of
the oven at high temperatures.
The timer can also be used to set the
finish time (see "Switching off
automatically").
Note that deposits of spices, syrups
and similar substances are not
removed by the catalytic cleaning.
These should be removed by hand
whilst still fresh using a mild solution of
hot water and washing up liquid
applied with a soft sponge or brush.
Should the catalytic liners become
ineffective through improper use or
heavy soiling, replacements can be
obtained from your dealer or the
Miele Spare Parts dept.
Cleaning and care
59