Operation Manual

PerfectClean
Before using for the first time remove
any stickers from PerfectClean
surfaces.
The enamelled surfaces of the following
are all treated with PerfectClean
enamelling.
–
Oven interior
–
Runners
–
Wire rack
–
Baking tray
–
Grill pan.
This surface has very good anti-stick
properties and is much easier to keep
clean than conventional oven enamel, if
cleaned regularly.
Food can be taken off it more easily
and soiling from baking and roasting is
easier to remove.
The following notes on cleaning and
care should ensure that the anti-stick
and easy clean properties of
PerfectClean last for many years.
PerfectClean surfaces can be treated
as you would treat glass. If you are
unsure whether a particular cleaning
product is suitable for PerfectClean
consider whether you could clean a
window pane with the product without
damaging it.
Allow the oven and accessories to
cool down before cleaning. Danger
of burning.
Normal soiling
Normal soiling should be cleaned as
soon as possible after each use with a
dishcloth, soft sponge or a soft nylon
brush, and a solution of hot water and a
little washing up liquid.
The longer soiling is left the harder it
will be to remove.
Stubborn soiling
Stubborn soiling, e.g. from roasting
may need to be soaked first with a
damp sponge to loosen it.
If necessary a non-stick scourer or a
scraper suitable for glass surfaces can
be used to remove it.
After cleaning rinse thoroughly with
clean water. The water must run off
the surface easily. Any residual
cleaning agents will hinder this
effect.
Cleaning and care
56