Operation Manual

a Oven display
and Temperature selector - with +
and – buttons
b Function selector
c Clock / timer display
and Clock / timer selector - with +
and – buttons
To change a setting on the oven,
proceed as follows:
^
Turn the function selector to the
required position.
^
Press the temperature or
clock/timer selector button in until
the triangle - is visible underneath
the required symbol in the display.
^
Whilst the triangle is flashing, use
the – or + buttons immediately to
make any changes.
The triangle will flash for appox. 5
seconds. If this input period has
elapsed you will have to call up the
required symbol again using the
temperature or clock / timer selector
button.
This principle applies whenever you
change a setting.
See "Using the oven" and
"Programming cooking times" for
detailed examples.
Programming sequence
25