Manualshelf

Installation Guide

ManualsBrandsImperial ManualsUnder Cabinet HoodsImperial 765 CFM 36" Wide by 22-1/8" Deep Stainless Steel Wall Mounted Range Hood with Dual Blowers and Baffle Filters from the 1900-10 Collection
123456789
Installation Instructions for WALL Mounting application.
1. From bottom of hood, measure 10” up and draw a line.
2. Take “U” shape installation bracket and line the bottom of the
bracket up with the line (center bracket left to right) install
bracket using #10 x 2-1/2” wood screws, if you have wood to
screw in to. If not use the 3/16” x 3” toggle bolts.
3. Lift up hood and connect hood brackets to installation bracket
using (8) 10-32 Hex Keps nuts. Make sure hood is level before
you tighten all screws.
4. Use (2) 3/16” x 3” toggle bolts or #10 x 2-1/2” wood screws and
(2) 1-1/4” OD Fender washers to secure to back of wall.
5. To install duct cover—remove tape from brackets and line up
duct cover to the brackets on top of hood.
Brackets
TOP