Simply Impeccable TVS150 Product Introduction TV stand with Built-in Home Theatre System
Thank you for purchasing our product (TVS510). The TV Stand designed with the most advanced SRS TruSurround HD/HD4 technology in the world, which brings you multi-channel surrounded sound effect. This outstanding TV stand with the Built-in Home Theatre System will greatly enrich your audio entertainment. The simple and compact design with its flat TV panel enhances the appearance of our product. We hope that it will bring you many hours of enjoyment.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Do not climb on this system. Do not scrape with rough or sharp objects. 3. Parts Description 1.Main box 2. Subwoofer box 3. Glass plate 4. Control panel 5. Subwoofer 3 6. Install screw 7. woofer piper 8. Connection strap 9. Connection hole 10.
4. Front Panel Control 1. LCD screen 2. Volume up 3. Volume down 4. Standby 5. Mode 6. Receiver 7. 3.5mm AUX MP3 Input 5. Remote Control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
. Rear Panel Control 1. Power On/Off 2. Fuse 3. Power cable 4. Power cable 5. OPTICAL Input 6.
. Assembly ① Gently put the main box on both of the subwoofer boxes. ② Connect the main box with the subwoofer boxes by the holes and straps, then push the main box ahead to fasten. ③ Install screw into the subwoofer box holes. ④ Put the glass plate upon it.
. Specifications 1. Output power (130W): Subwoofer Center Front Front 30watts x 2 18watts x 1 13watts x 2 13watts x 2 2. Frequency Response: 25Hz-20KHz 3. Power requirement: 120V.AC 60Hz 4. Dimension (W x H x D): Subwoofer unit 7.4x13.8x15.23 in. Satellite unit 46.6x5.7x15.23 in. 5. Carton Size (W x H x D): 49.8x18x17.4 in. 6. Net Weight: Gross Weight: 92.6 lbs 102.
. Using the appliance 1) First, according to section No.7 – assembly, assemble the product correctly. According to section No.6 – Rear panel control, connect the DVD/mp3/mp4, TV and the product correctly. 2) Put the plug in the wall socket with the 220V/50HZ power supply. (Fig. 9-1) 3)Put two pieces of batteries into the remote control correctly. (Fig. 9-2) Fig. 9-1 Fig. 9-2 4) Switch the power from “off” to “on” below the screen. (Fig. 9-3); the text ‘STBY’ shows on the screen at the same time (Fig.
5) Press the ‘ST-BY’ button on the control panel or ‘POWER’ button on the remote control, the product works. (Fig. 9-5) Description: as the product with power on, the screen light turns of and the product switch to sleep mode after 3 seconds if one does not press the ‘ST-BY’ button; press the ‘ST-BY’ button, the screen light turns on Figure 9-5 Figure 9-6 Figure 9-7 6) Select the desired setting to input the signal: (the product has COX,OPT and AUX mode to select, Fig. 9-5, Fig. 9-6 and Fig.
7) Volume choices: A Main volume (Fig. 9-9) a. Adjust the volume use ‘VOL+’ or ‘VOL-’ buttons on the control panel b. Adjust the volume use ‘VOL+’ or ‘VOL-’ buttons on the remote control B Subwoofer volume (Fig. 9-10): Adjust the volume use ‘SUB+’ or ‘SUB-’ buttons on the remote control C. centre volume (Fig. 9-11): Adjust the volume use ‘CEN+’ or ‘CEN-’ buttons on the remote control D Satellite volume (Fig.
7) Reset: press ‘RESET’ button, the product resume to default setting (Fig. 9-14, Fig. 9-15) 8) Shutdown steps: A. press the ‘VOL-’ button on the control panel or remote control to make the product volume down B.
10. Troubleshooting NO. problem 1 The appliance does not work at all 2 3 4 5 6 Cause Solution 1.the plug does not be put in Put the plug in the wall socket the wall socket 2. the wall socket does no t Make sure the wall socket ha s work 220V/50Hz power supply 3. loose fuse Make sure the fuse is tighten 4. power off Switch the power from “off” to “on” below the screen 5.sleep mode Switch the power from “off” to “on” below the s creen and press the S T-BY button No voice 1.
