ENGLISH PORTABLE DVD PLAYER OWNER`S MANUAL Please read this manual before operating UNIVERSAL SERIAL BUS DVP-1010
Table of Contents Table of Contents.......................................................................................................................................................................1 Safety Information......................................................................................................................................................................2 Remote Control............................................................................................................
Safety Information Please read all of the safety and operating instructions before operating this Player, follow all warnings placed on the Player and in the user's manual. These safety and operating instructions should be retained for future reference. Safety Information Do not expose the system to excessive moisture, rain, sand, or heat sources. Place the DVD Player on a firm, flat surface. Keep the DVD Player away from domestic heating equipment and direct sunlight.
Remote Control Remote Control 14 1 15 2 16 3 17 4 18 5 6 7 19 8 20 9 21 22 10 23 11 24 12 25 13 1.MENU/PBC Button Brings up the disc menu. 2.L/R Button Selects left, right and stereo sound tracks. 3.P/N Button Selects PAL/NTSC/AUTO TV systems. 4.TITLE Button 5.SUBTITLE Button Selects the subtitle's language. 6.Number Buttons (0,1,...,9) 7.SETUP Button Brings up the setup MENU to set up the system's language, audio, display, password etc. 8.(PLAY/ENTER)/DIRECTION Buttons 9.
Description Right View Front View 1 OP EN 2 3 4 1 7 2 5.LCD on/off switch 6.CURSOR(UP/DOWN/LEFT/ RIGHT), ENTER( ) 7 .MENU/PBC 8 .DISPLAY / / 1.OPEN 2. EARPHONE / SPEAKER VOLUME 3 .DC IN 12V 4.POWER ON/OFF 5.VIDEO IN ) ) 3 4 5 6 7 8 9 8 1.LCD 2.OPEN 3 .DISC COVER 4.PLAYBACK BUTTONS PLAY/POWER ON( ) SKIP-PREVIOUS/FAST REVERSE( SKIP-FORWARD/FAST FORWARD( PAUSE /STEP( / ) STOP/POWER OFF( ) 5 6 6.AUDIO IN/OUT 7.VIDEO OUT 8.SPDIF: Digital audio signal output jack 9.
Using the Remote Control Using the remote control Installing the battery 1. Open the battery compartment cover using a coin. Point the remote control directly at the remote sensor on the front of the DVD Player. 2. Insert a 3V lithium battery into the battery compartment with the polarity ( + ) facing up as marked. Battery 3. Replace the battery compartment cover and turn clockwise until it stops.
Connecting Earphones (Optional Accessory) You can attach an earphone with a stereo mini-jack plug to the phone jack ( using VOL + and VOL - on the remote control. Note: When the earphone is connected to the Phone Jack ( ) for private listening. The volume can be adjusted ), the speaker will be disconnected.
Connecting to an External Component You can enjoy video from VCR or camcorder on your DVD player. 1. Turn off DVD player, VCR and other components. 2. Connect the audio and video cables as illustrated below. 3.Turn on power.
Connecting to a TV You can enjoy DVD quality video on TV screen. 1. Turn off DVD player and other components. 2. Connect the audio and video cables as illustrated below. 3.Turn on power. 4.Repeatedly press TV/Video button on your TV to select the input from the DVD player.
Connecting to a Stereo Component By connecting the digital output (SPDIF) on the DVD player through a coaxial cable (optional accessory) to a Dolby Digital/DTS amplifier or processor, you can enjoy full 5.1 channel surround sound. Follow these steps for making the connection. 1.Turn off both DVD player and your stereo system. 2.Connect the SPDIF to your stereo system as illustrated below. 3.Turn on power of DVD player.
Using USB Port The player accepts most USB devices such as MP3, DSC, USB- drive, Digital Camcorder etc. The USB in this Player supports version 1.1/2.0. USB slot Pluging a USB device 1.Plug in the USB device to the USB port on the player. 2.Repeatedly press DVD/USB to select USB mode. Removing a USB device You can remove the USB device anytime even it is playing. To remove the USB device, simply grasp the end of the USB and remove it from the slot. Playing a USB device 1.
Using the AC Adaptor This portable DVD player can be powered by AC through the supplied switching power AC adaptor. It can also use the supplied battery pack to power. When the AC adaptor is connected to the unit and powered, the unit will be automatically and electrically disconnected from the battery pack and powered by the AC power. O PE N To DC12V IN on the DVD player To home power outlet Important ! Always turn off the DVD Player before connecting or disconnecting the AC cord.
Using the Battery Pack Installing the battery pack Removing the battery pack <1>.Align and insert the battery <2>.Slide the battery pack to the pack into the corresponding left until it clicks into place. slots on the back of the unit. <1>.Slide down the latch. <2>.Slide the battery pack to the right, and remove. Charging the battery pack 1.Attach the battery pack to the Player. 2.Use the AC adapter to charge the battery pack. Make the connection as illustrated below. 3.Slide POWER to ON.
Cautions in Using Battery Pack Danger! Strictly follow these safety information when using the battery pack, otherwise, a short circuit, overheating, smoke, fire, or damage to the product may result. Never disassemble or modify the battery pack in any way. Do not touch the terminal of the battery pack with a metal object. Do not place the battery pack in direct sunlight, dashboard of a vehicle, or high temperature place. It can cause explosion or fire. Do not expose the battery pack to water, fire, or heat.
Playing a Disc Preparation for Playback Resume 1.Make sure the Player has the power either from the battery pack or the AC adaptor. 2.Load a disc, following these steps: Open the top cover. Press the OPEN button to open the disc cover. Place a disc into the tray with the label side facing up. Close the disc cover. 3.Slide POWER to ON to turn on the power. There are two ways to resume your playback when interrupted. Method 1: for short time interruption 1.
Playing a Disc pressing to start playing the bookmarked scene. The Playback continues until the end of the disc. Repeat the above to play the other marked scenes. Slow Motion 1.During playback, repeatedly press SLOW to play at 1/2, 1/4, 1/8, 1/16, 1/32 speeds. 2.To resume normal playback, press . You can only perform slow motion play in the forward direction. GOTO You can go directly to a desired chapter and play, or play at a desired point of time. Follow these steps: (A)To play a specific chapter 1.
Playing a Disc Mute TITLE Press MUTE to silence the audio, press MUTE again to restore it. Press TITLE, it takes you to the very beginning of the title and play, or to the MENU if it has title menu. Menu/PBC DISPLAY During DVD playback, press MENU/PBC to return to the disc's Start Menu. If the disc does not have the Start Menu, or discs that refuse MENU function, appears.
Playing Mp3 and Regular Audio CD Valid MP3 CD Your MP3 files should be ISO 9660 or JOLIET format. Play In most cases, when a MP3 or audio disc is placed into the player, the first song file of the first folder plays. In other cases, the file manager appears. Use direction keys ( and ) to select the song file and press to play.
Playing Picture CD Valid Picture Rotate The player can play both Kodak Picture CD that you order from photo processing store, and home-made CD by burning JPEG files onto a CD-R or CD-RW disc. The picture can be rotated and flipped. 1.During playback, use direction keys ( and ) to rotate right 90 degrees, left 90 degrees, flip vertically and horizontally respectively. Play O Rotate Right 90 In most cases, after the disc is placed into the player, the first file will be shown.
Displaying and Sorting Files Displaying files Sorting files When a disc or USB device contains multiple file types, you can select and display only certain file types. You can list the file in the order according to its type, name or date. 1. Press STOP and select SORT FILE, press " " to confirm. 2. Select one of the sorting criteria ( by type, by name and by date). 3. Select Ascending or Descending order for listing the files, press " " to confirm. 4. Select EXIT and press " " to get out. 1.
Setting Language for OSD, Menu, Audio, Subtitle 1. Press SETUP on the remote control. 2. Use the direction keys ( ) to select Language Setup and its sub-menu. 3. Press to confirm your selection. 4. Press SETUP to exit.
Setting Screen for Display Format, Screen Saver, TV System 1. Press SETUP on the remote control. 2. Use the direction keys ( ) to select Screen Setup and its sub-menu. 3. Press to confirm your selection. 4. Press SETUP to exit. Turning on/off screen saver Screen Setup OSD Display Format Screen Saver TV System On Off Adjusting the Aspect Ratio 4:3 LB (Letter Box) Displays the content of the DVD title in 16:9 aspect ratio. The black bars will appear at the top and bottom of the screen.
Setting Audio for Downmix 1. Press SETUP on the remote control. 2. Use the direction keys ( ) to select Audio Setup and its sub-menu. 3. Press to confirm your selection. 4. Press SETUP to exit. Changing Downmix Audio Setup OSD Digital Out Downmix Lo/Ro Lt/Rt Changing Digital Out Audio Setup :Select OSD Digital Out Downmix SPDIF/PCM SPDIF/RAW Off :Select Note: SPDIF/OFF:select this when you do not want to have digital audio signal output.
Setting Parental Control, Password, Camera Angle, Default 1. Press SETUP on the remote control. 2. Use the direction keys ( ) to select Custom Setup and its sub-menu. 3. Press to confirm your selection. 4. Press SETUP to exit. Setting parental control When ON is selected, the player will display multi-angle mark on the screen if the disc has multi-angle shot.
Adjusting LCD Screen You can adjust screen"s Brightness, Contrast, Color, as well as to reverse the screen image 180 degrees. Adjusting Brightness, Contrast and Color 1.Press and hold MENU/PBC/LCD adj. for few seconds to display the adjustment menu. 2.Use to select the Brightness ( ), Contrast ( ),Color( ), and use to make the adjustment, Press ENTER to confirm. Reversing the screen 1.Press and hold MENU/PBC/LCD adj. for few seconds to display the adjustment menu. 2.
Troubleshooting If your DVD player dose not seem to be functioning properly, check the items below before you contact a service center. Symptom Check Power does not turn on or suddenly turns off Make sure the AC Power cord is securely plugged into an AC outlet. Turn the power off and then back on. Battery pack is in place but the power does not turn on or suddenly turns off Check that the battery pack is charged. If not, recharge it.
Troubleshooting Symptom Check While in the input mode, no picture is output from the external component to the DVD player Check that the video or audio cable is securely connected. Battery pack won't charge Check that the DVD player is turned on. You cannot charge the battery pack with the player turned off. A hot battery pack may take longer to charge. Wait until the battery pack is sufficiently cooled down.
Specifications General Power Requirements Input AC 100V~240V, 50/60 Hz, Output DC 12V Power Consumption > 15 W Weight 1155.5g (without battery pack) Dimensions Operating Temperature Range 255mm ( W ) x 179mm ( D ) x 32.2mm ( H ) +10 C~ +40 C Readable Disc DVD, DVD-R, DVD+R, DVD-RW,DVD+RW, VCD, CD, HDCD, Picture CD, CD-R, CD-RW, MPEG4, MP3, WMA . Readable USB DSC, Camcorder, U-drive, MP3 player, and other USB storage devices Video Output Composite Video 1 channel : 1.
If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive) Impecca USA 8 West Market Street, Suite 606 Wilkes-Barre, PA 18711 1-866-954-4440 www.impeccausa.
