Use and Care Manual

ENGLISHESPAÑOLFRANÇAIS

CARE & MAINTENANCE

IMPORTANT

1) Be sure to unplug the unit before cleaning or servicing.

2) Do not use gasoline, thinner or other chemicals to clean the

unit.

3) Do not wash the unit directly under a tap or using a hose.

It may cause electrical danger.

4) If the power cord is damaged, it should be repaired by manu-

facturer or its agency.

AIR FILTER CLEANING:

Clean the air filter at least once every two weeks to prevent inferi-

or fan operation due to dust.

REMOVAL: Remove the filter as shown in the diagram.

CLEANING: Wash the air filter by immersing it gently in warm

water (about 104°F/ 40°C) with a neutral detergent. Rinse the filter

and dry it in a shady place.

MOUNTING: Reinstall the filter.

UNIT ENCLOSURE:

Use a lint-free cloth soaked with neutral detergent to clean the

unit enclosure. Finish by wiping with a dry clean cloth.

BEFORE STORING OR NOT USING A UNIT FOR LONG PERIODS

OF TIME:

Remove the rubber plug at the back of the unit and attach a hose

to drain outlet. Place the open end of the hose directly over the

drain area in your floor or receptacle. (See figure F on page 10.)

Remove the plug from the bottom drain outlet, all the water in the

bottom tray will drain out. (See Figure E on page 10.)

Keep the appliance running on FAN mode for half a day in a warm

room to dry the appliance inside and prevent mold from forming.

Turn o the appliance and unplug it, wrap the cord and bundle

it with the tape. Clean the air filter and reinstall it (see above).

Remove batteries from the remote controller.

Stop the appliance and unplug it, wrapped the cord and bundle

it with the tape (Figure S). Clean the air filter and reinstall it (see

above). Remove batteries from the remote controller.

Lower filter A

Fig. R

Uppe

r filter

Lower filter B

Power cord

buckle

Power plug

dummy socket

Fig. S