User's Guide

INSTALLATION INSTRUCTIONS

Exhaust hose installation:

The exhaust hose and adaptor must be installed or removed

in accordance with the usage mode.

1. Install the adaptor B and adaptor I onto the exhaust hose as

shown

in Fig.

16a or

Fig.16

b. Refe

r to the

previo

us pages for

window kit installation.

2. Install the flexible Exhaust hose as depicted in Fig.17a&b.

Then push the hook of the Exhaust hose into the hole seat

of the unit in Fig.18.

Fig.16a

Fig.17a

COOL or AUTO mode

FAN, (DRY) DEHUMIDIFY mode

Install

Remove

CAUTION:

Make sure that there are no obstacles around the air

outlet of the exhaust hose (in the range of 500mm) to

ensure the exhaust system functions properly.

Fig.17b

Hole seat

Hook

Hole seat

Fig.18

Push Push

OPEN

VENT CONTROL feature

The Vent Control is located at the back of the air conditioner.

The OPEN position removes stale air from the room and

exhausts it to the outside. Fresh air is drawn in through normal

passages in the home.

When you do not need to circulate the room air, set Vent

Control to CLOSE position.

Fig.19