User's Guide

11
TROUBLESHOOTING TIPS:
Problem What to Check
Unit does not start
• Make sure the dehumidier plug is pushed completely into the outlet.
• Check the house fuse/circuit breaker box.
• Dehumidier has reached its preset level or bucket is full.
• Reservoir is not in the proper position.
Dehumidier does not dry
the air as it should
• Did not allow enough time to remove the moisture.
• Make sure there are no curtains, blinds or furniture blocking the front
or back of the dehumidier.
• The humidity control may not be set low enough.
• Check that all doors, windows and other openings are securely closed.
• Room temperature is too low, below 41°F (5°C).
• There is a kerosene heater or something giving o water vapor in the room.
The unit makes a loud noise
when operating
• The air lter is clogged.
• The unit is tilted instead of upright as it should be.
• The oor surface is not level.
Frost appears on the coils • This is normal. The dehumidier has an auto–defrost feature.
Water on oor
• Hose to connector or hose connection may be loose.
• During use with collection reservoir, but the back drain plug is open.
ES, AS, P2, EC, E3 appear
on the display
• These are standard error codes, please see page 7 for solutions.
The pump operation light blinks
• Clean the pump lter.
• Ensure the pump hose is not kinked or blocked.
• Empty the collection reservoir.
• Online 24/7: www.impeccausa.com
• By phone: [phone]
CONTACT SUPPORT: