User Manual

23
Using the Modeling Light (continued)
3. While the group icon and
MODEL are blinking, press
the and buttons to dim
or brighten the modeling light
from 10% to 100%.
Note: The modeling light brightness
level is displayed in the lower right
corner of the LCD screen. It represents
the modeling light power setting for the
selected group. To see the modeling
light setting for each individual group,
press the appropriate group button.
4. Press ENTER to set the modeling
light power.
5. Repeat these steps for each
group.
Important! The modeling light
brightness cannot be adjusted when
set to modeling light modes F3-2 or
F3-3. In those modes, the modeling light
brightness is proportional to the ash
power output.
See the Venture TTL-600 monolight’s
user manual for more information on
modeling light modes.
CH
ENERGY
MODEL