User Manual

22
The Venture TTL 600’s modeling light
can be activated in all modes by
pressing the MODEL button.
To adjust the modeling light brightness
level, follow these steps:
1. Make sure the Venture TTL 600 is
set to Modeling light mode F3-0 or
F3-1. (See the Venture TTL 600’s
user manual for information on
setting modeling light modes.)
2. Press the PRO button and then
press the button for the group you
want to adjust. The group icon
and MODEL will blink.
Using the Modeling Light
CH
ENERGY
MODEL
CH
ENERGY
MODEL