User Manual

21
1. Make sure the Venture TTL 600 is
set to the same channel, group,
and ID number as the Venture TTL
Controller.
2. Set the ash power output to the
desired brightness.
3. When the Venture TTL 600 is
ready to re, press the TEST
button. The monolight will re a
test ash.
Lockout mode prevents the Venture
TTL Controller from triggering the
monolights set to the selected group.
The settings for TTL and Manual
modes are stored in the controller’s
memory and can be reestablished on
the monolight when those modes are
reselected on the controller.
1. Press the appropriate group
button, and then press the MENU
button once or twice until the
lockout mode is displayed. Press
ENTER to set lockout mode.
2. To return to TTL or Manual mode
in the selected group, press
MENU again.
Firing a Test Lockout Mode
CH
ENERGY
MODEL