User Manual

20
1. Press the appropriate group
button, and then press the MENU
button once or twice until the
manual mode is displayed. Press
ENTER to set manual mode.
The LCD on the Venture TTL
600 will immediately switch to
manual mode, and power output
in fractions will appear on the
monolight’s LCD screen.
2. To adjust the exposure, select the
group by pressing the appropriate
group button, and then press the
and buttons to adjust the
value.
3. Press ENTER to set the exposure.
Note: If the Venture TTL 600 is set to
the same channel and group, the ash
exposure setting will change on the
monolight’s LCD screen.
Manual Mode
CH
ENERGY
MODEL