User Manual

19
High-speed sync lets you use shutter
speeds as fast as 1/8000 second. HSS
is always available with the Venture
Wireless Controller. See your camera’s
manual to check for your camera’s
fastest shutter speed and setting for
HSS.
Tip: Use F4-2 (power mode) on the
Venture TTL 600 Monolight to maximize
ash output with HSS. See the Venture TTL
600 monolight’s instructions for details.
For Nikon and Sony cameras, refer
to your camera’s manual to activate
SCS. The Venture wireless controller
will automatically switch to SCS mode.
Once SCS is disabled on your camera,
the Venture controller will return to
normal operating mode.
For select Canon cameras, rst activate
SCS mode on your camera. The Status
LED on the controller will blink rapidly
to indicate that the camera has been
set to SCS. Press and hold the ENTER
button until the HSS icon switches to
the SCS icon. The controller is now in
SCS mode. To exit SCS mode, press and
hold the ENTER button until the SCS
icon changes back to the HSS icon.
Note: HSS and SCS are always available
through your camera. Certain camera
models will not enable the display of the
HSS of SCS icons on the LCD screen.
Even if the icons are not displayed, HSS
and SCS will be active once you make
the appropriate settings on your camera.
High-Speed Sync (HSS) Second Curtain Sync (SCS)