User Manual

18
Adjusting the EV
The EV can be set from -3.0 to +3.0 in
1/3-stop increments for each group. To
adjust the EV, follow these steps:
1. Make sure the group is in TTL
mode.
2. Press the appropriate group
button. The group icon will blink.
3. Press the and buttons to
raise or lower the EV in 1/3-stop
increments.
4. Press ENTER to set the EV value.
Repeat these steps to adjust the EV for
other groups that are in TTL mode.
TTL Mode (continued)
CH
ENERGY
MODEL