User Manual
17
Important!
To take advantage of the Venture TTL
Controller’s functions, make sure your
Venture TTL 600 monolight(s) are set
to the proper channel, group, and ID
number. Refer to the Venture TTL 600’s
user manual for information on setting
these parameters.
Notes:
• The Venture TTL 600 will remain
in auto (AU) mode when the
controller is turned off. In order
to switch the monolight back to
manual mode, turn it off and then
turn it back on.
• If the Venture controller is in TTL
mode when powered on, but the
Venture monolight is in manual
mode, press ENTER to switch
the monolight to TTL (AU) mode.
Previous TTL settings will have
been saved.
TTL Mode (continued)