User Manual

16
When the Venture TTL Controller is
connected to a compatible camera
via hot shoe or PC cable, it can set the
appropriate ash level automatically, in
conjunction with the camera’s through-
the-lens (TTL) metering system.
To select TTL mode, do the following:
1. Press the appropriate group
button.
2. Press the MENU button once
or twice until the TTL mode is
displayed.
3. Press ENTER to set TTL mode.
The LCD on the Venture TTL 600
will immediately switch to auto
mode, and AU will appear on the
monolight’s LCD screen.
Repeat these steps to select TTL mode
for other groups.
TTL Mode
CH
ENERGY
MODEL