User Manual

13
The Venture Wireless Controller offers
nine selectable channels (1–9). To set
the channel, follow these steps:
1. Press the CH/MASTER button.
CH will blink on the LCD screen.
2. Use the and buttons to
select a channel.
3. Press ENTER to set the channel.
Note:
• Channel and ID settings on the
Venture TTL 600 monolight must
be changed manually. Refer to
the Venture TTL 600’s user manual
for instructions on how to set the
channel number.
• In order to communicate with
your Venture TTL 600 monolight,
make sure it and the controller
are set to the same channel
and ID. For instructions on how
to set the channel, consult the
user manual that came with the
Venture TTL 600.
Channel Selection
CH
ENERGY
MODEL